Hydraulic Supplies Brisbane

Shop High-Quality Tipper Trailer Kits By Flowline In Brisbane

If you're looking for a hydraulic tipper kit, then you’ve come to the right place. Flowline offers a range of hydraulic equipment such as hydraulic ram pumps, hydraulic power units, trailer tipper kits and more. Our hydraulic rams for sale ensure that you have quality products at a competitive price.

Hydraulic Tipper Trailer Kits

We provide a variety of hydraulic cylinders or telescopic cylinders to our clients including:

  • Hoses and Fittings: Flowline supplies hoses that are 2.5 metres long with reusable fittings. It is suitable for use on all hydraulic rams and power packs for tipper trailers.

 

  • Hydraulic Tipper Trailer Hinges: These strongly built hinges are perfect for a heavy-duty trailer with up to 10-tonne capacity.
    • Weight: 8.5 kilos (each)
    • Load capacity: 5 tonnes (each)
    • Pin: 30 m (weldable)
    • Key features: Grease nipples, right & left pair, aesthetic and neat

 

  • 1800 MM Tipper Trailer Kit – 6-Stage Cylinder with Power Pack
    • Capacity: 5 tonnes (including the dead weight of the tray)
    • Working pressure: 160 bars (2300 psi)
    • Height: 485 m
    • Approximate weight ram: 80 kilos (for kit)
    • Ideal mounting: Minimum half tray length from the rear end
    • Warranty: 1 year

 

  • 800 MM Tipper Trailer Kit – 4-Stage Cylinder with Power Pack
    • Capacity: 4.5 tonnes (including the dead weight of the tray)
    • Working pressure: 160 bars (2300 psi)
    • Height: 390 m (bottom to top)
    • Distance (centre of mounting to plate top): 160 mm
    • Ideal mounting: Minimum half tray length from rear hinge
    • Warranty: 1 year

 

  • 1500 MM Tipper Trailer Kit – 6-Stage Cylinder with Power Pack
    • Capacity: 5 tonnes (with the dead weight of the tray)
    • Height: 440 m (bottom to top)
    • Working pressure: 160 bars (2300 psi)
    • Ideal mounting: Minimum half tray length from rear hinge
    • Distance (centre of mounting to plate top): 170 mm
    • Warranty: 1 year

 

  • 1200 MM Tipper Trailer Kit – 6-Stage Cylinder with Power Pack
    • Capacity: 5 tonnes (with tray’s dead weight)
    • Height: 380 m (bottom to top)
    • Working pressure: 160 bars (2300 psi)
    • Distance (centre of mounting to plate top): 160 mm
    • Ideal mounting: At least half tray length from rear hinge
    • Warranty: 1 year

 

  • 1000 MM Tipper Trailer Kit – 6-Stage Cylinder with Power Pack
    • Capacity: 5 tonnes (with tray’s dead weight and max. 55-degree tipping angle)
    • Height: 345 m (bottom to top)
    • Working pressure: 160 bars (2300 psi)
    • Distance (centre of mounting to plate top): 345 mm
    • Ideal mounting: Should be a minimum half tray length from the rear hinge
    • Warranty: 1 year

Feature and Specification Of Our Hydraulic Parts

Flowline provides a range of hydraulic parts in Brisbane. We also offer hydraulic spool directional control valves. Directional control valves (DCVs) are basic parts of a hydraulic system. It permits fluid (hydraulic oil or water) to flow from one or more sources into different paths. This system consists of a spool inside a cylinder that is actuated mechanically or electrically. Hydraulic parts we offer are:

  • Single Spool Hydraulic Direction Control Valve (DCV)- P160
    Its features are as follows:
    • Lever operated
    • Spring centred
    • 60 ltr/min nominal flow capacity
    • Power beyond provision-plugged
    • The maximum working pressure is 300 Bars (4500 PSI)
    • Pressure line 1/2" BSPP Ports

 

  • Single Spool Hydraulic Direction Control Valve (DCV)- P140
    Its features are as follows:
    • Lever operated
    • Spring centred
    • 45 ltr/min nominal flow capacity
    • Power beyond provision-plugged
    • The maximum working pressure is 300 Bars (4500 PSI)

 

  • Hydraulic Powerpack -24V DC -10LT TANK
    • Hydraulic powerpack 24 V
    • 10L Tank
    • Hydraulic technicians should assemble the hoses
    • An auto electrician should wire the power pack

 

  • Hydraulic Powerpack -12V DC -10LT TANK
    • Hydraulic powerpack 12 V
    • 10L Tank
    • A hydraulic technician should assemble the hoses.
    • The auto electrician should wire the power pack.

 

  • Five Spool Hydraulic Direction Control Valve (DCV)- P560
    • DCV 5 (five) spool
    • Lever operated
    • Spring centred
    • 60 ltr/min nominal flow capacity.
    • Power beyond provision-plugged, with an in-built relief valve.
    • Maximum working pressure 300 bars (4500 psi);

 

  • Three Spool Hydraulic Direction Control Valve (DCV)- P360
    • DCV 3 (three) spool
    • Lever operated
    • Spring centred
    • 60 ltr/min nominal flow capacity
    • Power beyond provision-plugged, with in-built relief valve

 

  • Two Spool Hydraulic Direction Control Valve (DCV)- P260
    • DCV 2 (two) spool
    • Lever operated
    • Spring centred
    • 60 ltr/min nominal flow capacity
    • Power beyond provision-plugged, with in-built relief valve

What Are The Advantages Of A Power Pack Hydraulic System?

We have quality hydraulic power packs for sale. Here are a few advantages of a power pack hydraulic system:

  • Reduced weight
  • Lessen fuel consumption
  • Lower procurement costs
  • Speed up OEM final assembly line installation
  • Decrease maintenance
  • Support manufacturers’ ramp rates
  • Facilitate the use of localised hydraulic power
  • Increase adaptability

Why Choose Flowline For Hydraulics Services And Supply?

Being among the top hydraulic ram suppliers in Brisbane, Flowline offers reliable products that will make your job easier. Here are a few reasons to choose us for all your hydraulic equipment needs:

  • Premium quality hydraulic components and products
  • 1-year warranty on tipper kits
  • Competitive prices
  • Great customer service

Call our friendly team on 1800 239 399 or drop us an email at info@flowline.com.au for more details.